The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares T5 SP II Spada 3 Mille GT Strada 100 Fuel and Carburettors

Sort by Title

Sort by Price

Page 10 of 11

1 2 3 4 5 6 7 8 9 10 11

Accelerator Pump Inlet Valve PHF Carbs

FUA14930 Fits Le Mans 1, Le Mans 2, Le Mans 3, 1000 SP, Convert, G5, Cali 2, Cali 3, Mille GT, Strada 1000, Cali 1100

Dimensions:
7mm thread, 13mm high

Dellorto accelerator pump inlet valve for PHF carbs

This part is available by special order, request a quote

£11.00

INC VAT

£9.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Fuel Tap

TAA23470 Fits Mille GT, Cali 1100 (1994-1997), 750 SP, Strada 750, Strada 1000, T5 Polizia, Spada 3, V35 Florida, V65 Florida, V65 GT, V75 PA

Dimensions:
16mm threaded section, 8mm fuel pipe spigot

Manual petrol tap with nut and filter. On and off settings.

Point on lever faces back in off position. Used for RH applications on some models. TAA65401A or TAA65401B can be substituted for this part. Used for LH and RH fuel tap on Cali 1100

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

23105470-z 23105470 GU23105470 23 10 54 70
2310 5470 2310.5470 23.10.54.70

£16.00

INC VAT

£13.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Float 8.5g

FUA14000 Fits Convert, G5, 1000S, 1000 SP, 1100 Sport Carb, Cali 2, Cali 3, Cali 1100, Spada 3, T3, T3 Cali, T5, V7 Sport, Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, Mille GT

Dimensions:
62mm x 27mm x 44mm

Dellorto 8.5g float with tang for needle valve

Most Guzzi big twins originally had 10g floats- see FUA14001

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

14933000 GU14933000 14 93 30 00
1493 3000 1493.3000 14.93.30.00

£22.50

INC VAT

£18.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Inlet Manifold Kit Plastic

FUA30612 Fits Le Mans 1, Le Mans 2, Spada 3, Strada 1000, Cali 3 Classic, Cali 1100 Carb

Dimensions:
Accepts a 44mm OD carb

Plastic inlet manifold, replaces unavailable aluminium manifold. Contains inlet manifold, gasket, O rings, clip and M6 bolts to secure to head. PHF36 carb mounts direct to this manifold (no inlet manifold rubber required)

Note that on models with M8 inlet manifold bolts and standard heads (T3, 1000 SP) it will be necessary to drill out the manifold bolt holes from 6mm to 8mm to reuse your existing bolts

This part is available by special order, request a quote

£45.00

INC VAT

£37.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Float Pivot Pin

FUA17346 Universal Part

Dimensions:
47mm long

Pivot pin / needle suitable for PHF / VHB / PHM and PHBH carbs

Float pin also known as Guzzi ref. 17933167, 061527346

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

13933100 GU13933100 13 93 31 00
1393 3100 1393.3100 13.93.31.00

£13.50

INC VAT

£11.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Pod Air Filter RamAir

SIA00195 Fits V65 ALL, Imola 2, V50C, 750 Targa, Strada 750, NTX 750, Nevada 750 (carb models), T5 (series 1 & 2 VHB carbs), SP II (VHB carbs), S3, T3, 1000 SP, Nuovo Falcone, T4, Convert, G5, V7 Sport, 750S, 850T, Cali 2

Dimensions:
75mm high filter, 43mm ID for carb mounting

Pod type air filter for increased air flow

Made from a high performance twin layer foam this K & N type air filter is designed to offer improved and unrestricted airflow whilst offering adequate filtration. Washable and reusable (use hot soapy water). Best run dry for road. Fits VHB 29, VHB 30, PHBH28 and PHBH30 Dellorto carbs. You may find that a 5-10% increase in main jet size helps to make the most of the increased air flow with this filter

This part is available by special order, request a quote

£23.00

INC VAT

£19.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Pod Air Filter RamAir

SIA00166 Fits Le Mans 1, Le Mans 2, Le Mans 3, Cali 1100 (Carb), Cali 3, 1000S (PHF36 Carb), Spada 3, Strada 1000, Cali 3, Mille GT (PHF 30), T5 (PHF 30)

Dimensions:
91mm high filter, 48mm ID for carb mounting

Pod type air filter for increased air flow

Made from a high performance twin layer foam this K & N type air filter is designed to offer improved and unrestricted airflow whilst offering adequate filtration. Washable and reusable (use hot soapy water). Best run dry for road. Fits PHF 30 and PHF 36 Dellorto carbs. You may find that a 5-10% increase in main jet size helps to make the most of the increased air flow with this filter

This part is available by special order, request a quote

£22.50

INC VAT

£18.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Inlet Reduction Sleeve

FUA29400 Fits SP II, T5

Dimensions:
34mm thread, 29.5mm internal diameter - 42mm internal diameter at large end

Aluminium inlet reduction sleeve. Threaded at smaller end

Sorry this part is no longer available Sorry, this part is no longer available.

29114400 GU29114400 29 11 44 00
2911 4400 2911.4400 29.11.44.00

this part is no longer available
Sorry this item is out of production

Throttle Cable Long

CAA31565 Fits T5 Police, Nevada 750 (1993-2003), Nevada 350, 750X

Dimensions:
710mm outer length, 64mm free length, 5.6mm barrel nipple, 2.7mm barrel nipple

Long throttle cable, runs from twistgrip to splitter under tank

Supercedes Guzi ref. 31117581

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

31117565-z 31117565 GU31117565 31 11 75 65
3111 7565 3111.7565 31.11.75.65

£25.00

INC VAT

£20.83 EX VAT this is the price you will pay if you are ordering from outside the UK

PHF 36 Carb RH Dellorto

FUA28150 Fits Le Mans 1, Le Mans 2, Le Mans 3, Cali 3, Strada 1000, Cali 1100, Spada 3

Dellorto PHF36 DD right hand carb. This is a flat top carb with 90° angle adapter for the throttle cable. Supplied with cable choke set up. Carb body is darker than earlier versions

44mm inlet manifold connection, includes accelerator pump. Supplied with single banjo connector. These can be fitted to T3, Convert, 1000 SP and T4 if FUA30611 is fitted.
Carb normally supplied in the following specification:

60/3 slide
130 main jet
50 idle jet
70 choke jet
8.5 gram float

This part is available by special order, request a quote
28112650 GU28112650 28 11 26 50
2811 2650 2811.2650 28.11.26.50
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£330.00

INC VAT

£275.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 10 of 11

1 2 3 4 5 6 7 8 9 10 11